|
KRACHT 諾希德優(yōu)價供應KRACHT流量計、KRACHT齒輪流量計、KRACHT齒輪泵
|
|
Directional control valve
|
|
80 l/min, max 320 bar | WL 4.06 KRACHT The directional control valves WL 4/10 consist of housing, control spool, centering springs and operating solenoids. The three-position directional valves are fitted with two solenoids ...
|
|
Directional control valve
|
|
120 l/min, max 350 bar | WL 4.10 KRACHT Flow Measurement - that means high-dynamic, precise volume and flow measurements, evaluated according to the application - from a simple display unit to an intelligent microcontroller ...
|
|
Gear flow-meter
|
|
0.008 - 700 l/min, max 400 bar | VC series KRACHT Flow Measurement - that means high-dynamic, precise volume and flow measurements, evaluated according to the application - from a simple display unit to an intelligent microcontroller ...
|
|
Gear flow-meter
|
|
0.02 - 240 l/min KRACHT The gear type flow meters of the type VCA / VCN are flowmeters for liquids with a certain lubricity. The measuring unit of the KRACHT volume counter consists of a pair of gears, driven ...
|
|
Gear flow-meter
|
|
0.02 - 200 l/min, max 200 bar | VCA/VCN series KRACHT The gear type flow meter of the type VCG is a flow meter for liquids with a certain lubricity. The measuring unit of the KRACHT volume counter consists of a pair of gears, driven by ...
|
|
Gear flow-meter
|
|
1 - 65 l/min, max 315 bar | VCG series KRACHT The measuring mechanism of the KRACHT Volume counter VCL 0.1 for painting technology consists of a pair of gear wheels driven by fluid flow in accordance with the principle of operation ...
|
|
Gear flow-meter for paint and varnish
|
|
0.05 - 2 l/min, max 400 bar | VCL series KRACHT DuroTec® Gear Pumps DT 5 for abrasive and poor lubricating fluids.
In the year 1990, KRACHT initiated the development of Gear Pumps for abrasive and poor lubricating fluids.
|
|
Gear pump for abrasive liquid
|
|
150 - 250 cm3/r, max 100 bar | DuroTec® DT 5 series KRACHT Screw-type flow meters belong to the group of positive displacement flow meters. Two measuring spindles with a screw-shaped profile engage with each other. They are low-friction mounted ...
|
|
Helical screw flow-meter
|
|
1 - 1500 l/min, max 250 bar | SVC series KRACHT According to its design, the Kracht KP 0 external gear pump belongs to the type of so-called gland type pumps. The essential functional elements, gearing and bearing glands are located ...
|
|
High pressure gear pump
|
|
1 - 8 cm3/r, max 280 bar | KP 0 KRACHT Accordingly to its configuration the KRACHT external gear type pump series KP is to be classified into the category of the so-called gland type bearing pumps. All essential functional ...
|
|
High pressure gear pump
|
|
3 - 22 cm3/r, max 300 bar | KP 1 KRACHT Thanks to their construction (design principle) and the materials used KRACHT series KP 2/KP 3 external gear pumps are suitable for use under the most stringent operating conditions. ...
|
|
High pressure gear pump
|
|
20 - 62 cm3/r, max 300 bar | KP 2 KRACHT Thanks to their construction (design principle) and the materials used KRACHT series KP 2/KP 3 external gear pumps are suitable for use under the most stringent operating conditions. ...
|
|
High pressure gear pump
|
|
71 - 125 cm3/r, max 280 bar | KP 3 KRACHT KP series high pressure gear pumps are mainly used in oil-hydraulic plants. They are suitable both for hydraulic fluids as well as mineral oil bases (DIN 51524/25) and engine oils ...
|
|
High pressure gear pump
|
|
100 - 300 cm3/r, max 100 bar | KP 5 KRACHT Accordingly to its configuration the External Gear-Type Motor Series KM is classified in the category of the so-called Gland-Type Bearing Motors. All essential functional parts as ...
|
|
High pressure hydraulic gear motor
|
|
5.5 - 22 cm3/r, max 300 bar | KM 1 series KRACHT Hydraulic cylinders in the CNA Series are constructed with threaded piston rod ends. The cylinder heads and bases are made from Steel 52-3. The cylinders themselves are made from seamless ...
|
|
Hydraulic cylinder
|
|
40 - 125 mm ?, DIN 2391 | CNA series KRACHT The demand for reduced noise, reduced emissions and energy savings on mobile machines require alternative solutions for cooling systems. Beside the standard series of constant gear ...
|
|
Hydraulic fan drive system
|
|
KM 1 series KRACHT The thermovalve is a pre-controlled pressure relief valve with temperature-dependent pressure control and is mounted on the KRACHT KM gear motor in the place of the existing cover ...
|
|
Hydraulic gear motor with thermovalve
|
|
KRACHT A pilot valve operates the main control valve electrohydraulically. For operating the pilot valve, pressure-tight direct and alternating current magnets can be fitted switching in ...
|
|
Hydraulic pilot solenoid valve
|
|
200 l/min, max 315 bar | WL 4.16 KRACHT The pilot operated, sliding piston pressure relief valve HV/HVF is intended for inline mounting and is suitable to safeguard mean pressure hydraulic circuits up to 160 bars. The pipe ...
|
|
Hydraulic pressure limiting valve
|
|
max 750 l/min, max 160 bar | HV / HVF series KRACHT The pressure relief valve SPV/SPVF is a direct spring sliding piston valve. It is intended for mounting in pipelines and is suitable to safeguard low pressure hydraulic circuits up ...
|
|
Hydraulic pressure limiting valve
|
|
max 800 l/min, 30 bar | SPV / SPVF series KRACHT The noise optimized pumps of the KF Series are primarily designed for the transport of mediums with an increased share of air, whereby both normal operation and vacuum operation are ...
|
|
Low noise gear pump
|
|
63 - 630 cm3/r, max 25 bar | KF series KRACHT Direct spring pressure relief valve, type DBD, are suitable for inline mounting and serve for limitation of operating pressure in hydraulic systems. The operating pressure is optionally ...
|
|
Pressure relief valve
|
|
max 40 l/min, max 400 bar | DBD 06/08 KRACHT Direct spring pressure relief valve, type DBD, are suitable for inline mounting and serve for limitation of operating pressure in hydraulic systems. The operating pressure is optionally ...
|
|
Pressure relief valve
|
|
max 80 l/min, max 400 bar | DBD 10 KRACHT Direct spring pressure relief valve, type DBD, are suitable for inline mounting and serve for limitation of operating pressure in hydraulic systems. The operating pressure is optionally ...
|
|
Pressure relief valve
|
|
max 200 l/min, max 345 bar | DBD 20 KRACHT Transfer gear pumps KF gear pumps are used for pumping a wide variety of fluids. Transfer gear pumps KF gear pumps are distinguished especially by their wide range of variants which ...
|
|
Transfer gear pump
|
|
4 - 112 cm3/r, max 25 bar | KF series KRACHT Transfer gear pumps KF gear pumps are used for pumping a wide variety of fluids. Transfer gear pumps KF gear pumps are distinguished especially by their wide range of variants which ...
|
|
Transfer gear pump
|
|
100 - 730 cm3/r, max 25 bar | KF series KRACHT Pumps series BT and BTH are low speed gear pumps for transfering medium and high viscosity fluids, provided they have certain minimum amount of lubricating property, do not contain ...
|
|
Transfer gear pump
|
|
4 - 1056 cm3/r, 8 bar | BT, BTH series KRACHT The KF 32 ... 80 with T-valve comprised an attached pressure control valve with a separate tank connection. By a conformist damping the valve offers a good control characteristic and ...
|
|
Transfer gear pump
|
|
32 - 80 cm3/r, max 25 bar | KF series KRACHT In numerous technical processes dosing liquids is the focus of the task. PUR components, softeners, resins, lacquers, paints are just some of the most important liquids with a broad ...
|
|
Transfer gear pump
|
|
0.5 - 4 cm3/r, max 120 bar | KF 0 series KRACHT The central element in numerous technical processes is the metering of liquids. PU components, plasticisers, resins, adhesives, lacquers and paints are just a few of the important ...
|
|
Transfer gear pump
|
|
4 - 24 cm3/r, max 50 bar | KF series KRACHT With various applications conventional seals come up against their limits. Typical applications can be found in PUR plants, refrigerating installations and vacuum plant. It is possible ...
|
|
Transfer gear pump with magnet coupling
|
|
4 - 80 cm3/r, max 25 bar | KF series KRACHT Conventional sealing gaskets are pushed to their limits with different applications. Typical applications are found in polyurethane facilities, refrigerating machines and vacuum facilities. ...
|
|
Transfer gear pump with magnet coupling
|
|
100 - 630 cm3/r, max 25 bar | KF series KRACHT With various applications conventional seals come up against their limits. Typical applications can be found in PUR plants, refrigerating installations and vacuum plant. It is possible ...
|
|
Transfer gear pump with magnet coupling
|
|
0.5 - 4 cm3/r, max 120 bar | KF 0 series KRACHT The KF 32... 80 with universal valve also promotes with varying direction of rotation of the drive shaft to the same outlet port. Principle-partly outlet port and inlet port stays ...
|
|
Transfer gear pump with universal valve
|
|
32 - 80 cm3/r, max 25 bar | KF series KRACHT A turbine rotor is mounted in a stainless steel housing on two rotor shafts. The material of the bearing is either PTFE or tungsten carbide. That means even aggressive or slightly ...
|
|
Turbine flow-meter
|
|
0.92 - 9167 l/min, max 400 bar | TM series KRACHT The Valve Position Indicator VOLUMEC is a combination unit with mounting surface for directional control valves NG 06 according to ISO 4401-03-02-0-02 / DIN 24340-A6. In detail the ...
|
|
Valve position indicator
|
|
max 7 l/min, max 200 bar | VOLUMEC 02/04 KRACHT The VOLUMEC 5 valve position indicator consists of one volume counter and one indicator device. Mounted on a connecting plate, the VOLUMEC 5 carries out the functions of measuring ...
|
|
Valve position indicator
|
|
max 150 l/min, max 300 bar | VOLUMEC 5 KRACHT Now in the segment of the VOLUMEC Valve Position Indicators we offer beside the mechanical variation the electronic solution; the VOLUTRONIC® Valve Position Measuring Instrument VCA ...
|
|
Valve position indicator
|
|
0.25 - 10 l/min, max 160 bar | VOLUTRONIC® 0,2 KRACHT DuroTec® gear pumps KP 1 for abrasive and poor lubricating fluids. The limit of applications of transfer gear pumps has been reached when the transfer medium does not have the required ...
|
|
Wear resistant transfer gear pump
|
|
5.5 - 22 cm3/r, max 150 bar | KP DuroTec® series KRACHT
|